Shop by Category:
Textile & Screen Printing
Cart Total
Subtotal:
$0.00
Tax:
$0.00
Total:
$0.00
|
 |
|
|
- The first thing you want to do is have plenty of workspace available to unpack and inventory all of the parts in the box. While unpacking your new unit, make sure to check everywhere including all of the slots inside of the Styrofoam where small bags of hardware may be hidden and don¹t throw away any of the packaging until the item is completely assembled.
- The next step would be to inventory all of the nuts and bolts and other small parts by using the parts list located in the instruction manual. This is done so while assembling you can easily find the needed parts without searching and possibly using the wrong part and damaging the unit. If you happen to be missing something or something is damaged, Don¹t worry, we will send you the part as soon as possible.
- Now that we have inventoried everything we can start building. One problem that many people encounter is jumping steps. You must go in the order as our instructions refer. Take your time while working through the steps to insure a quality product once assembled.
- Do not tighten up any screws until the unit is completely assembled. This will help you line up the remaining holes for attachment as well as make the unit square and level. As soon as everything is complete go ahead and tighten the screws as required. Also remember the floor levelers play a big role in squaring and leveling the unit, so you want to make sure they are all screwed in the same distance, and adjusted as needed.
- If you happen to have any questions in regards to your new item please don¹t hesitate to email or call us, and once again thank you for choosing Studio Designs.
|
|
|